Medivators ADVANTAGE PLUS - System, Bar Code, and Endoscope Errors

104
Error Overview
Screen reports and errors are summarized by category and number in the following tables. More specic
information including potential causes, and actions for each error are included following that. For complex
problems, it is advisable to notify the maintenance department and/or your supervisor.
System Errors
Code Description
C-001 SCU error: %d: %S
C-012 No hardware denition received. Hardware not initialized
C-015 Server disconnected. Selection aborted
C-016 Run could not be congured, check SQL-server connection
C-017 User data could not be retrieved check SQL-server connection
C-019 The clock has been synchronized with the server computer
C-021 The expert control has been automatically closed, you have to log on again
C-030 The previous run has ended incorrectly. Program aborted to a safe situation
C-032 A failure occurred during the execution of a run. Program aborted to a safe state
C-033 Program aborted to a safe situation, but incorrect parameter set
C-040 The hardware denition contains an unknown signal: %d
C-042 Selected hardware denition not correct for “%s” type
C-052 Automatic start of program is not possible in the current state
C-053 Automatic program start up is not possible because another program is already active
C-054 Automatic start of program is not possible
C-060 Delayed start of program is not possible in the current state
C-080 The tag-reader is not available
C-099 Internal LIO failure :
Bar Code Errors
Code Description
M-910 unknown barcode
M-920 unknown operator tag
M-922 The scanned tag is an unknown endoscope code
M-930 Barcode not found
M-940 The code “%s” is not the correct %s code