Medivators ADVANTAGE PLUS - CHAPTER 1 Using this Manual

5
CHAPTER 1
INTRODUCTION
This chapter describes the MEDIVATORS
®
ADVANTAGE PLUS
®
Automated Endoscope Reprocessor.
Using This Manual
This manual describes the features of the MEDIVATORS ADVANTAGE PLUS endoscope reprocessor,
including the hardware, software, setup, operation, safety, maintenance, and troubleshooting procedures. It
is important to follow the instructions provided to keep the MEDIVATORS ADVANTAGE PLUS System
in proper operating order and to ensure that endoscopes receive adequate disinfection.
This is not a service manual and does not provide detailed instructions for service beyond general
maintenance. See Service Manual for servicing instructions. Contact your service representative for
additional service information.
Medivators ADVANTAGE PLUS Features
The MEDIVATORS ADVANTAGE PLUS System was designed for ease of use and maintenance in the
disinfection of endoscopes. Features include:
• Individual channel connectivity and channel blockage monitoring.
• Single use germicide: fresh disinfectant solution for each endoscope.
• Asynchronous operation of dual reprocessing basins with transparent glass lids.
• A dedicated personal computer (PC) for system operation of reprocessing cycle, cycle recording,
powerful quality assurance reporting, easy backups, networking availability, and remote diagnostics
• Easy-to-ll detergent and alcohol reservoirs
• Hookup blocks dedicated to a family of endoscopes ensure correct connectivity and ow rates to meet
manufacturers’ specications
• Diagnostics for operator assistance and troubleshooting
• Cleaning phase validated to eliminate manual cleaning of endoscopes prior to reprocessing (endoscopes
must be pre-cleaned immediately after procedures).