32
Figure 10 Selection Keys
Connector Blocks
The endoscope channels are connected to the MEDIVATORS
®
ADVANTAGE PLUS
®
Automated
Endoscope Reprocessor channel manifold via a connector block. Each endoscope model requires a unique
connector block to ensure that proper disinfection can be achieved. Refer to the hookup application guide
to identify the correct connector block to use for the endoscope to be reprocessed.
Note: Before a new type of endoscope is reprocessed or if you have any questions about a connection
block, contact your eld service representative.
Accessories
Endoscope accessories, buttons and valves may be disinfected in MEDIVATORS ADVANTAGE PLUS
system. Use the provided mesh bag.
Data Entry
Bar Code Reader
A bar code scanner can be used to automatically enter data rather than manually entering it with the control
panel. The system administrator may dene a list for any of the following items:
• Operator login name
• Endoscope code
• Doctor/specialist ID
• Assistant ID
• Patient number
To Next Page
Loading...
