Megmeet M5-N Series User Manual

Chapter 8 Drive Parameter Object
136
Parameter
No.
Sub-index
Name
Setting range
Minimum
unit
Default value
Effective
time
Property
selection
(reserved)
P10.09
0Ah
Stall over
temperature
protection enable
0: Shielded motor
stall
over-temperature
protection detection
1: Enable motor stall
over-temperature
protection detection
1
0
Immediate
At stop
P10.10
0Bh
Stall over
temperature
protection time
window
10~65535ms
1ms
200
Immediate
At stop
P10.11
0Ch
Encoder multi-turn
overflow fault
selection
0: Not shielded
1: Shielded
1
1
Immediate
At stop
P10.12
0Dh
Overspeed fault
threshold
0~15000rpm
1rpm
10800
Immediate
At stop
P10.13
0Eh
Maximum position
pulse frequency
100~4000kHz
1kHz
4000
Immediate
At stop
P10.14
0Fh
Absolute encoder
battery
undervoltage fault
handling
0: Set the battery low
voltage to fault,
monitor the battery
voltage every time
the driver is powered
on or reset,
undervoltage will
report the
undervoltage alarm,
and no detection over
time;
1: Set the battery low
voltage to warning:
battery undervoltage
(below 3V) will warn,
always detect the
battery voltage.
1
0
Immediate
At stop
P10.15
10h
Reserved

Megmeet M5-N Series Specifications

General

Brand	Megmeet
Model	M5-N Series
Category	Servo Drives
Language	English