Chapter 3 Installation Description
3.2 Servo motor installation
3.2.1 Installation site
It is strictly forbidden to install in places with corrosive or flammable and explosive gases
In places with metal powder, grinding fluid, oil mist, cutting, etc., please choose a motor with oil seal
Do not use the motor in a high temperature closed environment, the high temperature closed
environment will greatly shorten the life of the motor
3.2.2 Installation environment requirements
Table 3-2 M5-N servo motor installation environment requirements
Requirements (May be higher than the standard below)
Open, free from corrosive gas, flammable gas, explosive gas or
liquid
Relative humidity <90% (no condensation)
To Next Page
Loading...
Need help?
General
