Megmeet M5-N Series User Manual

Chapter 8 Drive Parameter Object
139
Parameter
No.
Sub-index
Name
Setting range
Minimum
unit
Default value
Effective
time
Property
46: Short circuit to
ground at power-on
47: Reserved
48: Internal logic error
1
49: Internal logic error
2
50: EtherCAT
initialization error
(only supported by
EtherCAT version)
51: EtherCAT
parameter mapping
error (only supported
by EtherCAT SoE
version)
52: Incorrect
EtherCAT distribution
clock/interpolation
cycle (only supported
by EtherCAT version)
53: Reserved
54: Synchronization
signal lost
55~60: Reserved
61: Abnormal
electronic gear ratio
62: Interrupt
positioning alarm
63~65: Reserved
66: Homing logic
error
70~71: Reserved
72: The software
does not match the
control board
73: Bootstrap timeout
74: Reserved

Megmeet M5-N Series Specifications

General

Brand	Megmeet
Model	M5-N Series
Category	Servo Drives
Language	English