ENGINE MECHANICAL SERVICE MANUAL NUMBER 22
Page 3A-130 90-860074--1 FEBRUARY 2002
CRANKSHAFT
1. Lubricate main bearing bores in crankcase with Molykote.
75389
a
b
a-Brush Dipped In Molykote
b-Main Bearing Bore
2. Install Crankshaft Installation Tool 91-801333504 on front gear to protect front main
bearing.
70404
a
a-Tool 91-801333504
3. Position engine crankcase horizontal with oil pan flange facing up.
4. Carefully insert crankshaft, with main bearing carriers attached, into cylinder block.
To Next Page
Loading...
Need help?
General