Micom P631 - Test Mode

3.12.13 Test Mode
If tests are run on the P631, the user is advised to activate the test mode so that
all incoming signals via the serial interfaces will be identified accordingly.
D5Z50EBA
MAIN:
Test mode USER
[ 003 012 ]
MAIN:
Test mode EXT
[ 037 070 ]
0: No
0
1
MAIN:
Test mode
[ 037 071 ]
1: Yes
Fig. 3-61: Setting the test mode.
P631
3 Operation
3-88 P631/EN M/R-11-C // P631-310-650