Micom P631 - 4 DESIGN

4 DESIGN
The P631 is available in a 40 TE case with different combinations of modules, see
Section 5.7, (p. 5-18).
A P631 is equipped with a detachable HMI or a fixed local control panel. The local
control panel is covered with a tough film so that the specified degree of IP
protection will be maintained. In addition to the essential control and display
elements, a parallel display consisting of multi-colored LED indicators is also
incorporated (see Section 6.2, (p. 6-2)). The meaning of the various LED
indications is shown in plain text on a label strip.
The PC interface (9-pin D-Sub female connector) is located under the hinged
cover at the bottom of the local control panel.
P631
P631/EN M/R-11-C // P631-310-650 4-1