5.2 Checking Nominal Data and Design Type
The nominal data and design type of the P631 can be determined by checking
the type identification label (see below). One type identification label is located
under the upper hinged cover on the front panel and a second label can be found
on the inside of the device. Another copy of the type identification label is fixed
to the outside of the P631 packaging.
Fig. 5-1: Example of the type identification label of a MiCOM P3x3 device.
The P631 design version can be determined from the order number. A
breakdown of the order number is given in Chapter “Order Information” of this
manual.
5 Installation and Connection
P631
P631/EN M/R-11-C // P631-310-650 5-3
To Next Page
Loading...
