9.3 Communications
The category “Communications” contains the general network-related settings.
Parameter Default Value
Connected Sub-
Network
Connected Sub-Network NONE
Optional name available to identify the Ethernet network.
Access Point AP1
Part of the communications control; preset, cannot be modified.
Parameter Default Value Address
Address
Configuration
IP Address 0.0.0.0
104 001
Assigned IP address of the P631 for the server function in the system.
SubNet Mask 0.0.0.0
104 005
The subnet mask defines which part of the IP address is addressed by the sub-
network and which part by the device that is logged-on to the network.
Gateway Address 0.0.0.0
104 011
This parameter shows the IPv4 address of the network gateway for
communication links to clients outside of the local network.
Parameter Default Value
General
Configuration
Media FOC
Network hardware provided as fiber optics (“FOC”) or twisted pair copper wires
(“10BaseT”).
TCP Keepalive
Communication monitoring at TCP level.
Database Lock Timeout 120
Return time period for setting procedures that have commenced. (The default
value above is in seconds. The IED Configurator, however, displays converts this
to minutes.)
P631
9 IEC 61850 Settings via IED Configurator
9-4 P631/EN M/R-11-C // P631-310-650
To Next Page
Loading...
