Control Step / Description Control
Action
Display
Step 3
Press [F1] again. The function configured to this
function key is carried out.
Voltage A-B prim.
20.7 kV
Voltage B-C prim.
20.6 kV
Step 4
When function keys are pressed during their associated
return time, then the set function is carried out directly,
i.e. without checking for the password again.
(By default, i.e. no password required, this step does
not exist and the function key is permanently effective.)
Oper/CtrlTest/LOC
Param. change enabl.
Yes
6 Local Control (HMI)
P631
P631/EN M/R-11-C // P631-310-650 6-13
To Next Page
Loading...
