Micom P631 - Page 334

Parameter Address
Default Min Max Unit Logic Diagram
Generic Object
Orientated
Substation Events
GOOSE: Function group GOOSE
056 068
0: Without
[spacer]
Cancelling function group GOOSE or including it in the configuration.
If the function group is cancelled from the configuration, then all associated
settings and signals are hidden.
Parameters included in this function group are only effective when function
group IEC is configured and enabled and when the parameters in this function
group have been activated by setting the parameter IEC: Switch Config.
Bank.
[spacer]
GOOSE: General enable USER
106 001
0: No
[spacer]
Enabling and disabling function group GOOSE.
[spacer]
GOOSE: Output 1 fct.assig.
106 011
060 000: MAIN: Without function
[spacer]
GOOSE: Output 2 fct.assig.
106 013
060 000: MAIN: Without function
[spacer]
GOOSE: Output 3 fct.assig.
106 015
060 000: MAIN: Without function
[spacer]
GOOSE: Output 4 fct.assig.
106 017
060 000: MAIN: Without function
[spacer]
GOOSE: Output 5 fct.assig.
106 019
060 000: MAIN: Without function
[spacer]
GOOSE: Output 6 fct.assig.
106 021
060 000: MAIN: Without function
[spacer]
GOOSE: Output 7 fct.assig.
106 023
060 000: MAIN: Without function
[spacer]
GOOSE: Output 8 fct.assig.
106 025
060 000: MAIN: Without function
[spacer]
GOOSE: Output 9 fct.assig.
106 027
060 000: MAIN: Without function
[spacer]
GOOSE: Output 10 fct.assig.
106 029
060 000: MAIN: Without function
[spacer]
GOOSE: Output 11 fct.assig.
106 031
060 000: MAIN: Without function
[spacer]
GOOSE: Output 12 fct.assig.
106 033
060 000: MAIN: Without function
P631
7 Settings
7-34 P631/EN M/R-11-C // P631-310-650