Micom P631 - Page 370

Parameter Address
Default Min Max Unit Logic Diagram
Limit value
monitoring
LIM_1: Function group LIM_1
056 042
0: Without
[spacer]
LIM_2: Function group LIM_2
056 043
0: Without
[spacer]
Cancelling function groups LIM_1 to LIM_3 or including them in the
configuration. If a function group is cancelled, then all associated settings and
signals are hidden, with the exception of this setting.
Parameter Address
Default Min Max Unit Logic Diagram
Programmable Logic
LOGIC: Function group LOGIC
056 017
0: Without
[spacer]
Cancelling function group LOGIC or including it in the configuration.
If the function group is cancelled from the configuration, then all associated
settings and signals are hidden.
Parameter Address
Default Min Max Unit Logic Diagram
Programmable Logic
LOG_2: Function group LOG_2
056 089
0: Without
[spacer]
Cancelling function group LOG_2 (“Logic 2”) or including it in the configuration.
If the function group is cancelled from the configuration, then all associated
settings and signals are hidden.
P631
7 Settings
7-70 P631/EN M/R-11-C // P631-310-650