Further options
Order Information MiCOM P631
Two Winding Transformer
Differential Protection
P 6 3 1 - 0 0 0 0 -310 -4xx -650 -46x -9x x -8xx
Switching threshold on binary inputs:
>18 V (standard variant)
Without order extension No.
>90 V (60...70% of VA,nom = 125...150 V)
8)
-461
>155 V (60...70% of VA,nom = 220...250 V)
8)
-462
>73 V (67% of VA,nom = 110 V)
8)
-463
>146 V (67% of VA,nom = 220 V)
8)
-464
With communication / information interface:
Without
Without order extension No.
Protocol can be switched between:
-92
IEC 60870-5-101/-103, Modbus, DNP3, Courier
and IRIG-B input for clock synchronization
and 2nd interface (RS485, IEC 60870-5-103)
For connection to wire, RS485, isolated
1
For connection to plastic fiber, FSMA connector
2
For connection to glass fiber, ST connector
4
Protocol IEC 61850, single connection
-94
For connection to 100 Mbit/s Ethernet, glass fiber SC and wire RJ45
6
and 2nd interface (RS485, IEC 60870-5-103)
For connection to 100 Mbit/s Ethernet, glass fiber ST and wire RJ45
7
and 2nd interface (RS485, IEC 60870-5-103)
Protocol IEC 61850, redundant connection
21)
-98
For connection to 100 Mbit/s Ethernet, glass fiber ST, SHP
1
and IRIG-B input for clock synchronization
and 2nd interface (RS485, IEC 60870-5-103)
For connection to 100 Mbit/s Ethernet, glass fiber ST, RSTP
2
and IRIG-B input for clock synchronization
and 2nd interface (RS485, IEC 60870-5-103)
For connection to 100 Mbit/s Ethernet, glass fiber ST, dual homing
3
and IRIG-B input for clock synchronization
and 2nd interface (RS485, IEC 60870-5-103)
Language:
English (German)
4)
Without order extension No.
Spanish (English)
4)
Not yet available - on request -803
Polish (English)
4)
Not yet available - on request -804
Russian (English)
4) 7)
Not yet available - on request -805
Key
●
2) Switching via parameter, default setting is underlined!
●
4) Second included language in brackets.
●
7) Hardware option, supports Cyrillic letters instead of special West
European characters.
●
8) Standard variant recommended if higher pickup threshold not explicitly
required by the application.
●
21) IEC 61850 redundant connection with power supply options E to M only.
Information about Ordering Options
Language version
In order to display the Russian data model, the corresponding order extension
number (‑805) must be added upon ordering so that the hardware option
P631
15 Order Information
15-2 P631/EN M/R-11-C // P631-310-650