A4.1.1.4 Application Layer
(See National Preface of EN 60870-5-101.)
Transmission mode for application data
Mode 1 (least significant octet first), as defined in clause 4.10 of IEC 870-5-4, is
used exclusively in this companion standard.
Common Address of ASDU (System-Specific Parameter)
[✓] One octet [✓] Two octets
Information Object Address (System-Specific Parameter)
[✓] One octet [✓] Structured
[✓] Two octets [✓] Unstructured
[✓] Three octets
Cause of Transmission (System-Specific Parameter)
[✓] One octet [✓] Two octets (with originator address)
Selection of Standard ASDUs
Process Information in Monitor Direction (Station-Specific Parameter)
P631
A4 Telecontrol Interfaces
A4-4 P631/EN M/R-11-C // P631-310-650
To Next Page
Loading...
