Version Changes
IEC
Bug fixing:
●
The implementation of the IEC 61850 signals
RBRFn and the IEC 61850 modeling of I
N
in the
Logical Nodes MMXU and MSQ has been modified
so that it matches other MiCOM Px3x protection
devices.
MAIN
Bug fixing:
●
Settings for daylight saving time were reset after
a warm restart.
LED, MAIN, ... The English designation text of the following data point
has been changed, but functionality remains
unchanged. The old designation is shown on the left
and the new designation on the right-hand side.
LED: Fct. assig. H12 rot → LED: Fct.assig. H12
red
P631
‑308
‑407/408
‑630
Release: 2011-02-09
Hardware
No changes.
Diagram
No changes.
Software
DVICE The new data point (008 233) DVICE: SW
vers.Chin.DHMI DM is a purely internal version
number (for the order option “Chinese display”).
Bug fixing:
●
Display problems with the Fault Panel are
resolved.
MAIN New logic state signals for clock synchronization:
The parameter: MAIN: Time synchronized
(009 109) shows whether an external clock
synchronization had been carried out. This signal is
reset after 10 minutes.
PC The following parameter has been removed: PC:
Name of manufacturer (003 183).
Note: Compatibility even with older versions of the
operating program continues to be guaranteed.
A5 P631 Version History
P631
P631/EN M/R-11-C // P631-310-650 A5-21
To Next Page
