MICRO-EPSILON optoCONTROL 2600 - A 5 Operating Menu; A 5.1 Initialization and Operation in the Measurement Mode

Page 69
Appendix | Operating Menu
optoCONTROL 2600
A 5 Operating Menu
A 5.1 Initialization and Operation in the Measurement Mode
Power On
Valid measurement
program ?
Laser ON
Controller operating in standard
measurement program "Edge
bright-dark"
or at last selected measuring
program
Waiting loop for
download with
instruction text
Required no. of edges in
measurement window ?
Reset
Min
, Max, P-P
1st
switching:
Temporary mastering/zero-setting
2nd switching:
Undo of mastering/zero-setting
"
Main menu
"
ESC
ESC
ESC
Display change
Press briefly
Press for 3 seconds
Press briefly
No
Yes
Yes
No
Load the option and measurement
program data into the main memory
Multi-segment measurement program
MULTISEG
A S1 mm
NORMAL
P-P Min Max
0.028
+21.0041
MULTISEG
A S2 mm
NORMAL
P-P Min Max
+0.0083 +11.5582 +11.5665
+11.5602
+13.234
DIA
A mm
NORMAL
P-P Min Max
+0.0025 +13.2331 +13.2356
+13.2345
--.---
DIA
A mm
NORMAL
P-P Min Max
+0.0000 +0.0000 +0.0000
--.----
Fig. 64 Operating Menu Initialization and Operation in the Measurement Mode