Version 1.10 Page 10 of 203
1.3 THE MODULAR SYSTEM
In this configuration, OptoJump Next allows to carry out:
1.3.1 GAIT TEST
Gait tests can consist of simple exercises (moving from A to B), but also of more complex ones, such
as 'roundtrip' or walking backwards. They can be more complex, if needed, adding obstacles (e.g.
plastic cones) or actions to be carried out between the various gait phases (sitting down and getting
up before coming back, for example) or simultaneously.
1.3.2 RUNNING TEST
Running tests, just like gait tests, can be carried out either starting from a stand or running, to
analyze the various phases, how the incremental weariness acts on the patient at each round
installing the system on a track, measuring the time of a change of direction and the following
acceleration, and so on…
Thanks to the practical and innovative assembling system using caps, the modular system is
assembled in a few minutes and does not require cables to connect the bars or further net adapters.
The length goes from a minimum of 2 meters to a maximum of more than 100 meters.
To Next Page
Loading...