Version 1.10 Page 71 of 203
4.2.2.9 STATIC TEST
Static (Sway) tests are the only ones that do not need OptoGait bars but only the Gyko inertial
sensor.
The sensor is typically placed behind the patient's shoulder blades and measures the subject's
antero-posterior and medio-lateral movements during the exercise (which can be bending on one
foot, a squat, etc.)
Main Parameters
Start type: this can only be "Software command"
Stop type: Indicates how to interpret the end of the test: with "External Pulse", "End of Time"
or "Software Command"
Test length: appears only if Stop type = "End of Time" and specifies how many
minutes:seconds the test must last (from 00:01 to 09:59)
To Next Page
Loading...
