Version 1.10 Page 72 of 203
After inserting the data, remember to press <Save> to save and return to the list of defined tests.
To review the parameters of a defined test, pass over them with the mouse, or double-click on them
(this is equivalent to pressing <Edit Test>).
Editing a test definition is only possible if no tests using this definition have already been performed.
To delete a test definition, select it from the list and press <Delete Test>; obviously all the tests
connected to this definition will be deleted!
To duplicate a test definition (useful for example, if a left-foot test has been defined and the same
shall be applied to the right foot, or vice versa), select the test from the list and press <Duplicate
Test>. This creates a copy of the test, which can then be renamed and fully edited.
The buttons <Import Test> and <Export Test> are for copying the definition of a test from one
database to another. Press <Export Test> and save the XML file on your hard drive. Open another
database (or create a new one) and press <Import Test> choosing the file previously saved.
The tests preconfigured by Microgate can be neither edited nor eliminated, but duplicated.
To Next Page
Loading...
