Microhard Systems VIP4G - Page 190

© Microhard Systems Inc. 190
5.0 AT Command Line Interface
AT+MCTPS Enable or disable com port
AT+MCTBR Set com port baud rate
AT+MCTDF Set com port data format
AT+MCTDM Set com port data mode
AT+MCTCT Set com port character timeout
AT+MCTMPS Set com port maximum packet size
AT+MCTP Set com port priority
AT+MCTNCDI Enable or disable com port no-connection data intake
AT+MCTMTC Set com port modbus tcp configuration
AT+MCTIPM Set com port IP protocol mode
AT+MCTTC Set com port tcp client configuration when IP protocol mode be set to TCP Client
AT+MCTTS Set com port tcp server configuration when IP protocol mode be set to TCP Server
AT+MCTTCS Set com port tcp client/server configuration when IP protocol mode be set to TCP Client/Server
AT+MCTUPP Set com port UDP point to point configuration when IP protocol mode be set to UDP point to point
AT+MIS Module Input status
AT+MOS Module Output status and setting