Microhard Systems VIP4G - Page 60

© Microhard Systems Inc. 60
4.0 Configuration
Switch Threshold Configuration
The Switch Data Threshold setting defines the threshold at which transmission rates trigger the
changeover from the shared tree to the RP tree; Switch Register Threshold does the opposite in the same
format. Regardless of which of these you choose, the rate option is for transmission rate in bits per second,
interval is the sample rate in seconds -- with a recommended minimum of five seconds. It is recommended
to have the same interval if both settings are used.
Image 4-2-15: Network > PIM-SM Configuration
The Switch Data Threshold setting defines the threshold at which
transmission rates trigger the changeover from the shared tree to the
RP tree.
Switch Data Threshold Rate
Values (bps)
(none)
Sample rate in seconds (recommended minimum of 5 seconds)
Switch Data Threshold Interval
Values (seconds)
(none)
Switch Register Threshold does the opposite of the Switch Data
Threshold Rate in the same format.
Switch Register Threshold Rate
Values (bps)
(none)
Sample rate in seconds (recommended minimum of 5 seconds)
Switch Register Threshold Interval
Values (seconds)
(none)