Need help?Do you have a question about the MicroStep-MIS MSB780X1D and is the answer not in the manual?
Provides a general introduction to the MSB780 and MSB780X barometers, highlighting key features.
Details the physical components, principle of operation, interfaces, and power for the MSB780/MSB780X.
Covers the setup and usage of the MSB780X transfer standard, including probe connection and battery management.
Outlines procedures for device maintenance, error handling, and recommended recalibration intervals.
Step-by-step guides for calibrating the barometer using single or multiple pressure points and adjusting analog output.
Comprehensive guide to serial commands for configuration, measurement, adjustment, and data management.
Explains how to use the touchscreen display for viewing data, navigating menus, and changing settings.
Details the SDI-12 interface, supported commands, and procedures for sensor communication.
Instructions for setting the analog output range, quantity, scale, and performing tests.
Provides specifications for measured quantities, performance, environmental conditions, and power consumption.
Lists common problems and their solutions for the MSB780/MSB780X barometer.
Information on order codes for different configurations of MSB780 and MSB780X barometers.
Steps and hardware requirements for updating the device's firmware using the loader software.
General| Category | Weather Station |
|---|---|
| Manufacturer | MicroStep-MIS |
| Model | MSB780X1D |
| Power Supply | 12 - 24 VDC |
| Measurement Parameters | Wind speed, wind direction, temperature, humidity, precipitation, atmospheric pressure |
| Wind Direction Range | 0 to 360 degrees |
| Humidity Range | 0 to 100% RH |
| Atmospheric Pressure Range | 600 to 1100 hPa |
| Communication Interface | RS485 |
| Operating Temperature | -40°C to +70°C |
To Next Page
