MSB780(X) - User’s Guide
Example:
dir e:<cr>
DIR e:<cr><lf>
Disk E DIR:<cr><lf>
File name Size [B] Date dmy Time hms<cr><lf>
16030102.CSV 952 28.03.2016 10:32:22<cr><lf>
17030101.CSV 2954 15.03.2017 14:58:04<cr><lf>
17042505.CSV 1826844 25.04.2017 21:23:02<cr><lf>
17042601.CSV 1327 26.04.2017 03:02:02<cr><lf>
17050801.CSV 10772600 09.05.2017 00:13:10<cr><lf>
All clusters: 1000576, Used clusters: 36592, Free clusters: 963984, Cluster size:
1024<cr><lf>
OK<cr><lf>
6.33 "type <filename>" print file
This command will print the content of the file.
Example:
type 16030102.CSV<cr>
1: first line of file<cr><lf>
2: second line of file<cr><lf>
3: etc...<cr><lf>
––- End of file ––-<cr><lf>
6.34 xmodemr - downloading files using XMODEM
This command starts file transfer through XMODEM protocol. It is designed mainly for use with
AWS Service software which enables to list and download files using copy-paste or drag and
drop methods.
If you want to use the command directly, nonetheless it is not very user friendly, you can do it as
follows:
Example:
XMODEMR E:\17030104.CSV<cr> Note: The path, name and extension ARE case sensitive!
Waiting for XMODEM receive.<cr><lf>
The barometer is now waiting for master to start the transfer with ’C’ character (according to
XMODEM standard). You can use for example Hyperterminal software which manages also
packet acknowledging, request for retransmit etc. Note: To prevent from getting stuck, there
48
To Next Page
Loading...