MSB780(X) - User’s Guide
Example:
hhcp?<cr>
HHCP: 0.10 m<cr><lf>
6.54 "dt" Get date and time
Use this command to print the current date and time.
Example:
dt<cr>
Actual date and time: 10:49:07 28.03.2016 Monday<cr><lf>
Date and time format: HH:MM:SS DD.MM.YYYY <cr><lf>
6.55 "setdt" Set date and time
Use this command to set the current date and time.
Example:
setdt<cr>
Actual date and time: 10:49:07 28.03.2016 Monday<cr><lf>
Date and time format: HH:MM:SS DD.MM.YYYY <cr><lf>
Set time in HH:MM:SS format:12:59:59<cr>
Set date in DD.MM.YYYY format: 29.03.2016<cr>
Date and time was set correctly.<cr><lf>
Actual date and time: 12:59:59 29.03.2016 Tuesday<cr><lf>
6.56 "setpin" Set new PIN code
Setting of some measurement parameters (hqfe, hqnh, ICAO mode, etc.) is protected by PIN
code to prevent changes by unauthorized person. The PIN can be changed via LCD touch-
screen after entering the old PIN or via this command without need to know the old PIN.
Example:
setpin<cr>
Insert new PIN (1-8 nums, empty = off): <cr><lf>
4321<cr>
57
To Next Page
Loading...
