MSB780(X) - User’s Guide
RH: 35.201<cr><lf>
P result - P: 1003.012, Pqfe: 1003.012,
Pqnh: 1003.012<cr><lf>
The example shows result of the d<cr> command of a two transducer version MSB780X. Pres-
sure measurements for the two transducers follow after P: in hPa unit. The resulting pressure is
also outputted.
6.5 “cnf?” Print configuration
The command prints various configurable parameters, and also serial number and firmware
version (which are not configurable). Furthermore, this command lists the values of correction
coefficients k, q.
Example:
34
To Next Page
Loading...
