MSB780(X) - User’s Guide
2. one parameter: set new value.
Example:
aerr 10<cr>
Actual error value: 0.000 V<cr><lf>
New error value: 10.000 V<cr><lf>
wait.. OK<cr><lf>
10 Technical Data
10.1 Quantities
Besides pressure, the barometer enables to measure, display, output and watch by alarm sev-
eral quantities. In the table 21 you can find the list of available quantities with short description
and acronyms.
Table 21: Available quantities
Available quantities
Acronym Meaning Available units
P
pressure (weighted average of all transducers)
hPa, inHg, psi, torr, bar,
mbar, mmHg, kPa, Pa,
mmH2O, inH2O
P1
pressure of transducer 1
hPa, inHg, psi, torr, bar,
mbar, mmHg, kPa, Pa,
mmH2O, inH2O
P2
pressure of transducer 2
hPa, inHg, psi, torr, bar,
mbar, mmHg, kPa, Pa,
mmH2O, inH2O
P3
pressure of transducer 3
hPa, inHg, psi, torr, bar,
mbar, mmHg, kPa, Pa,
mmH2O, inH2O
HCP
HCP corrected pressure
hPa, inHg, psi, torr, bar,
mbar, mmHg, kPa, Pa,
mmH2O, inH2O
QFE
QFE corrected pressure
hPa, inHg, psi, torr, bar,
mbar, mmHg, kPa, Pa,
mmH2O, inH2O
QNH
QNH corrected pressure
hPa, inHg, psi, torr, bar,
mbar, mmHg, kPa, Pa,
mmH2O, inH2O
Continued on next page
82
To Next Page
Loading...
