51
An AUTOMATIC process ends with WAX impregnation performed in the MAIN CAVITY (left cavity and part
of the screen, with PINK background), as shown below.
In this case WAX is AUTOMATICALLY pumped from the WAX CAVITY (right) to the MAIN CAVITY (left).
An audio alarm warns when program is over; press Unload reagent, then Extract the rack.
After every WAX phase it is suggested to check the wax level (image above left), to be ready with the right
quantity of wax in the next run.
Now press: Exit to perform later the MAIN CAVITY CLEANING CYCLE.
Start Cleaning to perform immediately the MAIN CAVITY CLEANING CYCLE.
To Next Page
Loading...
