87
On this page there are settings to control the expiration date of the liquid used with the VIROCLEAN instrument
(default 12 months from opening) and to control the liquid level in the bottle (default 200 cycles). Refer to
chapter 5.32 for details on the SUPRASPOR reagent.
Below these checkboxes there is a “Replace reagent” button to reset the counters after having replaced the
expired bottle.
DESCRIPTION OF DECONTAMINATION CYCLE:
When the program starts (manual or automatic), the following message appears reminding you to remove
whatever is not absolutely necessary from the area and that ventilation must be off.
Pressing OK starts the program immediately, whereas if you do not press OK, the cycle will start after 10min.
While the program is running, the following message will remain on the screen reminding the user not to use
the instrument during this brief period (80 seconds).
To Next Page
Loading...
