2-10
(2) Adjustment on LH-100
4-colors (M/M/K/K/C/C/Y/Y)
Printing method UV lamp position
Single-layer printing: printing color ink layer on media.
• Move the right and left UV lamp to the position at 65mm.
4-colors + white ink (M/K/C/Y/M/C/W/W)
Printing method UV lamp position
Single-layer print that prints color ink layer on media.
• Move the right and left UV lamp to the position at 120mm.
Two layer print that overlap the white ink layer on the color ink
layer.
• Move the right and left UV lamp to the position at 65mm.
Two layer print that overlap the color ink layer on the white ink
layer.
• Move the right and left UV lamp to the position at 65mm.
4-colors + clear ink + white ink (M/K/C/Y/CL/CL/W/W)
Printing method UV lamp position
Single-layer print that prints color ink layer on media.
• Move the right and left UV lamp to the position at 120mm.
Single-layer print that prints clear ink layer on media (mat and
gross).
• Move the right and left UV lamp to the position at 0mm.
Two layer print that overlap the clear ink layer on the color ink
layer (mat and gross).
• Move the right and left UV lamp to the position at 0mm.
Three layers print that overlap the color ink layer on the white
ink layer and then, overlap the clear ink layer.
• Move the right and left UV lamp to the position at 65mm
*1
when printing with white + color and it move to the position at
0mm when printing with clear ink.
Thickness print that overlap the multilayer of clear ink on color
ink layer.
• Move the right and left UV lamp to the position at 0mm.
Thickness print that overlap the color ink layer on the white ink
layer and then, overlap the multilayer of clear ink.
• Move the right and left UV lamp to the position at 65mm
*1
when printing with white + color and them move to the position
at 0mm when printing with clear ink.
4-colors + clear ink + primer + white ink (M/K/C/Y/Cl/P/W/W)
Printing method UV lamp position
Single-layer print that prints a color ink layer on the
media
• Move the right and left UV lamp to the position at 120mm.
Single-layer print that prints a white ink layer on the
media
• Move the right and left UV lamp to the position at 65mm.
Single-layer print that print primer layer and clear ink
layer on the media
• Move the right and left UV lamp to the position at 0mm.
Two layers print that overlap the color ink layer on the
primer layer
• Move the right and left UV lamp to the position at 65mm.
Tow layers print that overlap white ink layer on the
primer layer
• The left and right UV lamp at 0mm position at the primer
printing
Move to 65mm position at white ink printing.
Three layers printing that overlap the color ink layer on
the primer layer and then overlap the white ink layer
• The left and right UV lamp at 0mm position at the primer
printing
Move to 65mm position at color + white printing
To Next Page
Loading...
