To Ensure Safe Use
10
• Avoid touching the relief valve (pressure regulating valve) or blocking the exhaust port of the
vacuum unit (immediately below the table). Doing so may reduce the vacuum strength or cause
abnormal heat generation or failure of the machine.
• Use at low temperature may cause the vacuum unit to generate a high-pitched noise. This does
not indicate a failure.
l
Do not stand or sit on the table
• Never stand or sit on the table. Disregarding this precaution may impair the precision of the
table surface and affect print quality.
l
Caution regarding moving parts
• Keep parts of the body such as the face and hands away from moving parts. Also keep clothing
(e.g., loose clothing and accessories) that may impede work away from the machine. Failure to
do so may result in injury.
• Long hair should be tied back. Failure to do so may result in injury.
l
Do not disassemble or repair
• Do not attempt to disassemble or repair this machine. Otherwise there is a risk of failure, electric
shock, or fire.
l
Ultraviolet light (UV) and the UV-LED unit
• Do not place combustible materials underneath UV-LED unit or cover the UV-LED unit with
paper or cloth. Disregarding this precaution may result in fire or smoldering.
To Next Page
Loading...
