MIMAKI JFX550-2513 - Chapter 2 Printing

Chapter 2 Printing
This chapter
This chapter describes printing procedures and settings.
Print Process ...................................................58
Load the media................................................60
Media ......................................................... 60
Load the media. ......................................... 61
Setting the Media Origin............................. 62
Registering the Media Thickness ....................66
Measuring Automatically ............................ 66
Entering Values Manually .......................... 67
Setting the Head Gap......................................69
Checking the Head Gap Value................... 69
Test Printing ....................................................70
Checking Print Head Discharge ................. 70
Checking White Ink Discharge ................... 71
Ejection Failures......................................... 72
Head Cleaning..................................................73
Correcting the Drop Position ............................75
Preparing a Job (RIP Data) ..............................76
With output port set to [Ethernet] .................76
With output port set to [File] .........................80
Printing .............................................................83
Repositioning the UV-LED Unit....................83
Starting Printing ...........................................84
Stopping Printing..........................................86
Moving the Y-Bar .........................................86
Printing Using Nozzle Recovery ..................87