Chapter 4 Maintenance
113
4.2 Maintenance Timing
Timing Item
At the end of the work
day
Clean the wiper and wiper bracket. "Wiper Cleaning"(P. 114)
Clean the wiper cleaner. "Wiper Cleaning"(P. 114)
Clean the cap rubber. "Cap Rubber Cleaning"(P. 116)
Clean the NCU. "NCU Cleaning"(P. 117)
Clean the underside of the UV-LED lamp. "Carriage Underside
Cleaning"(P. 118)
Clean the underside of the carriage. "Carriage Underside Cleaning"(P. 118)
At the end of the work
week
Clean the waste ink draining channel. "Waste Ink Draining Channel
Cleaning"(P. 120)
Clean the area around the station. "Station Area Cleaning"(P. 116)
Clean the table. "Table Cleaning"(P. 121)
Clean the cover and Y-bar. "Exterior Cleaning (e.g., cover, Y-bar, )"(P. 121)
Check the waste ink levels in the waste ink tank.
Periodically Shake the Ink bottle. "Ink Maintenance"(P. 114)
Tools Required for Maintenance
To order replacement consumable items, contact your local dealer or our service office. For more information
on consumable items, refer to our website. https://mimaki.com/supply/inkjet.html
• Avoid storing this product in locations accessible to children.
4
To Next Page
Loading...
