Chapter 3 Settings (MPC)
108
3.7 System Menu
Shows various information about the machine.
Item Overview
System information Shows system information about the machine and control PC.
HDD disk space Shows the disk space available on the control PC.
Machine information Shows information about the machine.
Version Shows the machine firmware version and MPC version.
Ink expired Shows the ink expiration date.
Distance correction Displays the correction value set for the machine.
License Shows license information.
Log collection Collects the machine operating logs and settings information.
Manual Log collection tool Collects the machine operating logs and settings information manually.
"Collecting Logs"(P. 149)
Automatic Log collection
tool
Collects the machine operating logs and settings information automatically.
Document Shows the MPC user's guide and an error code list.
Operation manual Shows the MPC user's guide.
Alarm list Shows a list of error codes.
Service maintenance mode This mode is exclusively for use by Mimaki representatives.
Power Controls power to the machine and the control PC. "Power
Supply"(P. 108)
Reset system Used when clearing the alarm fails to clear the alarm or when operations
become unstable "SYSTEM ALARM"(P. 98)
Reset machine Used if recovery fails even after a system reset
Reboot System Used if recovery fails even after a machine reset. The control PC will
restart. The system will take some time to start up.
Shutdown System Shuts down the system. Turn off the main power supply. "Turning Off
the Power"(P. 108)
Power Supply
Do not turn off the main power supply for the machine or the power supply for the control PC. The control PC
controls the machine. Turn off the power only for machine issues that cannot be resolved. Always restart
after turning the power off.
Turning Off the Power
1
From [MENU] on the touch panel, tap [SYSTEM].
• This displays the system menu.
To Next Page
Loading...
