MIMAKI JFX550-2513 - Ink or Any Other Liquid Used with the Machine; Precautions for Ink and Liquids

Ink or Any Other Liquid Used with the Machine
23
Ink or Any Other Liquid Used with the
Machine
Precautions regarding ink, maintenance liquid, or other liquids used with this machine are indicated on the
containers. Thoroughly read them and make sure you understand the contents.
• Take steps to prevent leakage into natural water systems or domestic wastewater. Some
constituents are toxic to aquatic life.
• Be sure to read the safety data sheet (SDS) before use. https://mimaki.com/supply/sds/
• Pay close attention to ventilation and be sure to wear safety glasses, gloves, and a mask when
handling ink, maintenance liquid, waste ink, or other solutions used with the machine. Leaking
ink may adhere to the skin or get into the eyes or mouth.
• Use only genuine Mimaki Engineering anti freezing liquid. Use of other anti freezing liquid may
cause failures of the cooling unit.
• Take care to prevent any potential sources of ignition such as sparks caused by static electricity
or material impacts.
• Be sure to dispose of any unneeded anti freezing liquid in the following manner.
(1) Soak it up with materials such as sawdust or rags and burn them in an incinerator.
(2) Pass them onto a licensed industrial waste disposal company after clearly indicating their
contents.
• Do not subject the Ink bottle to strong shocks or violent shaking. Do not attempt to refill the ink.
Leaking ink may adhere to the skin or get into your eyes or mouth.
• Do not disassemble the Ink bottle. Leaking ink may adhere to the skin or get into your eyes or
mouth.
• Avoid storing this product in locations accessible to children.
• When disposing of the product, contact an industrial waste disposal operator or dispose of the
product in accordance with the local laws and regulations.
• Do not use ink, maintenance liquid, or other liquids used with this machine with other printers.
Doing so may damage the machine.
• Do not touch the metal parts of the ink IC chip. Static electricity may damage the ink IC chip,
and dirt or damage may make the ink IC chip unreadable.