MIMAKI JFX550-2513 - Installing the Mimaki Driver

Chapter 1 Before Use
45
6
Configure the network settings.
• Configure the network according to the network settings of the control PC.
• For more information regarding the network settings of the control PC and RIP PC, contact your
network administrator.
7
Restart the RIP PC.
8
Confirm that the connection has been established.
• Connect the RIP PC and control PC via a LAN cable. "Connecting to a Local Network"(P. 40)
9
Open Explorer on the RIP PC and enter [\\machine serial number] in the address bar.
• The machine serial number can be checked on the touch panel (MENU > [SYSTEM] > [System
information]).
10
Check the Explorer display.
• Check whether two folders, [HotFolder] and [SharedJob], are displayed.
If they are displayed, configuration is complete.
Installing the Mimaki Driver
1
Download the Mimaki driver from the Mimaki website.
• https://mimaki.com/download/inkjet.html
[JFX550-2513, JFX600-2513] > [Driver / Utility]
1