MIMAKI JFX550-2513 - Registering the Media Thickness; Measuring Automatically

Chapter 2 Printing
66
2.3 Registering the Media Thickness
Set media thickness as follows:
Item
Automatically register media thickness. "Measuring Automatically"(P. 66)
Manually register media thickness. "Entering Values Manually"(P. 67)
Measuring Automatically
Check beforehand
• Is media loaded? "Load the media."(P. 60)
1
From QUICK MENU on the touch panel, tap [Measure media thickness].
• A dialog box appears.
• You can also visualize this as follows:
(1) From MENU on the touch panel, tap [SETTING 2].
(2) Tap [Media] > [Measure media thickness].
2
Tap [Start].
• The carriage will move over the table and the [Measure media thickness] screen will be activated.
3
Move the carriage to the position of the media and tap [Measure].
• After performing the measurement, a measured value confirmation dialog will appear.