MIMAKI JFX550-2513 - 3.4 Setting 1 Menu

Chapter 3 Settings (MPC)
104
3.4 Setting 1 Menu
Set various print options.
Item Overview
Print Set print options.
Logical seek Set the range of carriage movement.
• Logical seek: Set the range of carriage movements.
– OFF: Machine size area
Unidirectional print Bi-directional print
Carriage movement
– ON: Print data area
Unidirectional print Bi-directional print
Print data
Carriage movement
Note: Refresh operations may cause the carriage to move to the flushing unit while printing is in
progress
.
Refresh Reduces nozzle clogging by regularly discharging ink from the print heads.
• Level: Choose higher numbers to discharge ink more often.
Ionizer Sets the ionizer (optional). For more information, refer to the operating manual for the
ionizer.
UV conditions Set the conditions for UV-LED lamp emission.
• Auto: When this is turned on, the intensity (illuminance) is adjusted automatically.
• Intensity: Set the intensity (illuminance).
Machine motion Set print options.
Work change Set post-printing operation.
• Work change: Set to On to move the Y-bar to the view (evacuation) position and to
turn the vacuum off.
Auto vacuum • Displayed only when the blower is connected.
• Set the vacuum strength.
MAPS MAPS: Mimaki Advanced Pass System
• This function disperses the boundaries between passes to make feed streaks
between passes less visible.
• Altering MAPS may alter the color. This function may be less effective with certain
types of images.