Chapter 3 Settings (MPC)
105
Item Overview
MAPS preset
1 setting
Register a preset of your choice.
• Speed: Reducing speeds will make streaks less visible. However, printing will be
slower.
• Smoothing: Increasing smoothing makes streaks less visible.
MAPS preset
2 setting
MAPS preset
3 setting
Default MAPS Set your preferred preset from 1 to 3 as described above or set to Auto. This should
normally be set to Auto.
Internal pattern Set the print position for printed patterns used in test printing or for correcting the drop
position.
Origin shift • Origin shift: Prints in the direction specified when set to ON.
• Origin shift direction: Set the print direction.
: Feed (vertical) direction
: Scan (horizontal) direction
Origin shift
margin
• Y margin: Sets the scan (horizontal) direction margin.
• X margin: Sets the feed (vertical) direction margin.
3
To Next Page
Loading...
