MIMAKI JFX550-2513 - Preparing the RIP Software

Chapter 1 Before Use
47
4
Download the color profile.
(1) Select the check box for the color profile corresponding to the media and resolution to be
used.
(2) Click [Next].
• The profile downloaded here will be installed the next time RasterLink is launched.
5
Click [Finish].
• "Profile Update" closes.
• For more information, refer to the RasterLink installation guide. https://mimaki.com/download/
software.html
• Download the latest color profiles from the Mimaki website. The profiles downloaded can be
installed using Profile Manager.
https://mimaki.com/download/inkjet.html
[JFX550-2513, JFX600-2513] > [Profile]
Preparing the RIP software
The explanation here applies to MIMAKI RIP software (RasterLink).
1
Launch RasterLink.
• The [Printer Management] screen appears.
• To add a new model, launch RasterLink, then select [Preferences] > [Printer Management].
1