Chapter 3 Settings (MPC)
106
3.5 Setting 2 Menu
Set various operation-related settings.
Item Overview
Media Set information about media.
Measure
media
thickness
Automatically measure media thickness.
"Measuring Automatically"(P. 66)
JOG
operation
Perform carriage operations and set media size and thickness.
Media origin Enter the media origin position.
Media
thickness /
Head gap
Set the media thickness and head gap.
"Entering Values Manually"(P. 67)
"Setting the Head Gap"(P. 69)
Bi-directional
adjustment
When using bi-directional printing, correct the drop position. "Correcting the Drop
Position"(P. 75)
Bi-direction
adjustment
value
Check the printed pattern and enter correction values.
***Pattern Select the resolution and speed to correct, then print.
Example: 600Std pattern, 600Hi pattern
View position Set/move the Y-bar view (evacuation) position.
View position Set the Y-bar evacuation position.
View position Moves the view all the way to the rear, all the way to the front, or to another set position.
System setting Configure the system.
Language Change the touch panel display language.
Unit Change the touch panel measurement unit.
Network
setting
Set the network address.
• Check IP address: Shows the machine's current IP address.
• DHCP: Set to ON to use the IP address assigned by the DHCP server.
Automatic
operation
Set to ON to enable automatic operation in conjunction with robots or other devices.
HotFolder
setting
Set the number of jobs that can be stored in HotFolder.
• Up to 100 jobs can be stored in HotFolder by default.
• If the number of jobs stored in the HotFolder exceeds the set value, jobs are deleted
in order with the oldest last print date first.
To Next Page
Loading...
