MIMAKI JFX550-2513 - 2.6 Head Cleaning

Chapter 2 Printing
73
2.6 Head Cleaning
The following head cleaning methods are available. Choose the method based on test results.
Item Details
Soft If the print shows a bent line (deflection)
Normal If the print shows a missing line (nozzle clogging)
Hard If soft cleaning and normal cleaning fail to resolve ejection failures (e.g., nozzle
clogging, deflection)
• Cleaning is not possible when [Ink End] is displayed. Replace with new ink. "Ink
Replacement Method"(P. 49)
1
From QUICK MENU on the touch panel, tap [Cleaning].
• A dialog box appears.
Cleaning Type
Print head to clean
• You can also visualize this as follows:
(1) From MENU on the touch panel, tap [MAINTENANCE].
• The Maintenance menu is displayed.
(2) Tap [Cleaning] > [Cleaning].
2
From MENU on the touch panel, tap [MAINTENANCE].
3
Select the type of cleaning.
4
Select the Head to clean.
JFX600 JFX550
11 22 33 44
55 66 77 88
11 22
33 44
5
Tap [EXEC].
6
Run another test print and check the print results.
• Repeat the cleaning and test printing process until the print results appear normal.
2