Chapter 1 Before Use
50
Ink type Cap type
• Primer ink
• LUS120 ink
• LH100 ink
[Cap B]
Replacing Ink
l
RemoveInk bottle
1
Rotate the lever on the tank section from left to right.
• Never rotate the ink bottles. Doing so may result in leaking ink.
2
Lift the ink bottles vertically.
• Check to confirm that the light-blocking cover is closed when removing ink bottles. Close
the light-blocking cover by hand if it is open. If the light-blocking cover is left open, the ink
may harden, resulting in printer failure.
• Be careful to prevent ink leaks from the ink bottles.
To Next Page
Loading...
