MIMAKI JFX550-2513 - 3.1 Mimaki Printer Controller

Chapter 3 Settings (MPC)
96
3.1 Mimaki Printer Controller
MPC software is used to operate and control the JFX550-2513, JFX600-2513. The Mimaki Printer Controller
is installed on the control PC. The touch panel is used for MPC operations.
Screen Structure
1 2 3
4 5
6
No. Item Overview
1 PRINTER STATUS
(printer information
area)
Machine status is indicated by icons. "PRINTER STATUS"(P. 97)
• : Displays the status of each component of the configuration.
2 INK STATUS
(ink information area)
Icons indicate remaining ink levels, ink errors, and other Ink bottle status
information. "INK STATUS"(P. 97)
• : Displays the Ink bottle slot number and ink color.
3 SYSTEM ALARM
(system information
area)
Of various possible errors, this area shows the most important errors.
"SYSTEM ALARM"(P. 98)
• : Displays all current errors.
4 MENU
(menu area)
Shows various menus.
• (PRINT): Set print conditions/settings for the media used. "Print
Menu"(P. 100)
• (MAINTENANCE): Menu used for machine maintenance
"Maintenance menu"(P. 101)
• (SETTING 1): Used to set various printing-related operations
"Setting 1 Menu"(P. 104)
• (SETTING 2): Used to set various operations for the machine
"Setting 2 Menu"(P. 106)
• (HISTORY): Shows maintenance records and other information.
"History Menu"(P. 107)
• (SYSTEM): Shows various information about the machine.
"System Menu"(P. 108)