Chapter 3 Settings (MPC)
98
l
Icon display
Icon Summary
Remaining ink levels are indicated graphically and as percentages.
A blue warning icon appears in the lower right if ink runs low. Very little ink remains. Have new
ink ready.
A yellow warning icon appears in the lower right if ink runs out or ink errors occur. Printing is
not possible.
A red warning icon appears in the lower right if the ink is past its expiration date. Replace with
new ink or use up as quickly as possible. Printing is possible. "Restrictions concerning the
machine"(P. 25)
SYSTEM ALARM
Of various possible errors, this area shows the most important errors. Tap [Detail] to display all current
errors.
l
Alarm display
No. Summary
1 Level
(Level 0): Printing is possible. Printing will continue even if these errors occur
during printing.
• Examples: Ink near end, ink expired (1 month past)
(Level 1): Printing and cleaning are not possible. Any printing underway will
pause if any of these errors occur. Take appropriate measures based on the
message.
• Examples: Ink depleted, ink IC chip not inserted
(Level 2): Printing and cleaning is not possible. Any printing underway is
aborted if any of these errors occur. Take appropriate measures based on the
message.
• Examples: Ink overflow
(Level 3): No machine operations are possible. Take appropriate measures
based on the message. If you see this message repeatedly, contact your local
dealer or our service office.
2 Code Refer to the error code list. "Problems Indicated by Messages"(P. 139)
3 Unit Not disclosed; used for service
4 Contents Refer to the error code list. "Problems Indicated by Messages"(P. 139)
To Next Page
Loading...
