MIMAKI JFX550-2513 - Signal Tower Light

Chapter 1 Before Use
37
Color Status Summary
- Off No error
Green Illuminated Ink is being supplied (no error)
Red Flashing One of the following errors has occurred: Printing is possible.
• INK NEAR-END
• Ink expired (1 month passed)
Illuminated One of the following errors has occurred: Printing is not possible.
• INK END
• The ink IC chip is not inserted.
• Other ink errors
Flashing (fast) Printing is not possible.
• Ink expired (2 month passed)
Green/Red Lit in
alternation
Ink is being supplied, but an error has occurred.
Signal tower light
To confirm machine status, check the color of the illuminated lights.
A buzzer also sounds to signal that the carriage and Y-bar will begin moving soon.
Volume slider
Color Status Summary
Red Illuminated The system is down or some other problem is preventing printing.
Flashing An error has occurred. Check the touch panel for error details and resolve
the problem. "Problems Indicated by Messages"(P. 139)
Green Illuminated Indicates printing is underway. This also flashes to indicate test printing—
for example, when printing built-in patterns.
White Illuminated Media is being held in place by suction.
• For safety, set the buzzer to full volume. Volume cannot be adjusted on machines up to the 20
series.
1