Chapter 1 Before Use
49
1.4 Ink Replacement Method
When Ink Near End is Displayed
Ink levels are low. We recommend replacing with new Ink bottle as soon as possible. Note that ink may run
out during printing.
You can check which Ink bottle must be replaced in INK STATUS on touch panel. "INK STATUS"(P. 97)
When Ink End is Displayed
The ink has run out. Replace with new Ink bottle.
Thoroughly read the following and make sure you understand its contents.
Ink and other liquids used with this machine
• Pay close attention to ventilation and be sure to wear safety glasses, gloves, and a mask when
handling ink, maintenance liquid, waste ink, or other solutions used with the machine. Leaking
ink may adhere to the skin or get into the eyes or mouth.
l
Clear Ink
The types of clear ink that can be used will vary depending on the ink type mounted. Note that only the
following combinations can be used.
Mounted ink type Clear ink type
LUS150 ink LH100 ink
l
Ink caps
The type of ink cap that can be used will vary depending on the ink type. Note that only the following
combinations can be used.
Ink type Cap type
• LUS150 ink [Cap A]
1
To Next Page
Loading...
