MIMAKI JFX550-2513 - With Output Port Set to [File]

Chapter 2 Printing
80
• Up to 100 jobs can be saved to [HotFolder] by default. If the number exceeds 100 jobs, the
oldest jobs in the print history are deleted. The number of jobs that can be saved can be
changed as follows:
"Setting 2 Menu"(P. 106)[System setting] > [HotFolder setting]
Copying jobs to a shared folder at any time
Jobs can be created in advance on the RIP PC, and then copied to the shared folder at any time for
importing to MPC.
1
Create a job on the RIP PC in advance.
2
Copy the job created on the RIP PC to the shared folder (SharedJob or HotFolder) to be used.
• Enter [\\*******] in the Explorer address bar to open the shared folder of the machine.
• Please change "********" to the serial number of the printer.
• From MENU on the touch panel, tap [SYSTEM] > [System information] to display the
serial number on the browser screen at right.
With output port set to [File]
Import jobs (RIP data) to the machine (control PC) using an external hard drive (e.g., USB flash memory).
Creating RIP Data
1
Launch RasterLink.
• Click the icon on the RIP PC desktop.