MIMAKI JFX550-2513 - Page 59

Chapter 2 Printing
59
"Test Printing"(P. 70)
Good example Bad example
Deflection Nozzle clogging
7.
Clean the head to clear malfunctioning nozzles.
"Head Cleaning"(P. 73)
8.
Adjust the drop position for bi-directional printing.
"Correcting the Drop Position"(P. 75)
0+5
-5
In this case, the drop position
correction value is -4.0
9.
Import the job (RIP data) into MPC.
"Preparing a Job (RIP Data)"(P. 76)
10.
Print the job (RIP data).
"Printing"(P. 83)
2